Altendorf WA 6, Руководство по эксплуатации

Страница: 30 / 76

Installation
30
Installation
0000010064-007- GB
6 Installation
6.1 Transport
Ambient conditions
Do not store the machine in an environment with explosive or corrosive gases.
The ambient temperatures for transport and storage range between - 25° C
and + 55° C; 70° C is permissible for a short time.
The maximum air humidity must not exceed 90%, and condensation must be
avoided in all cases.
Packaging
The type of packaging depends on the type of transport. Unless otherwise
agreed in the contract, the packaging corresponds to the HPE guidelines es
-
tablished by Bundesverband Holzmittel, Paletten, Exportverpackungen e.V.
(the German Association for Wooden Materials, Pellets, Export Packaging) and
the VDMA. Observe the symbols on the outside of the packaging!
Degree of dismantling
The degree of dismantling of the sliding table saw depends on the transport
conditions and the options supplied with the machine. The sliding table is al
-
ways shipped dismantled into several installation assemblies.
Sensitivity
Particular care must be taken when transporting the sliding table saw in order
to avoid damage from force or poor loading and unloading. Knocks and con
-
densation due to extreme temperature fluctuations must be avoided during
transport.
Intermediate storage
If the sliding table saw or its assembly groups are not installed immediately af
-
ter delivery, ensure that they are stored in a protected location. They must be
properly covered to prevent any ingress of dust or moisture. Bare parts without
surface treatment of the sliding table saw are protected with a preservation
agent which will protect them for approx. 1 year. Represervation is necessary if
storage is to last longer than this period.