Altec ATP3000, Руководство пользователя

Страница: 44 / 63

43
+31(0)78 - 615 20 33
info@altec.nl
www.altec.nl +32(0)2 - 270 34 88
info@altec.be
www.altec.be
NL BE
Item Description Default
Language This item is used to setup the language on display. English
Printer Information This feature is used to check the printer serial number, printed
mileage (m), printed labels (pcs) and cutting counter.
N/A
Initialization This feature is used to restore printer settings to defaults. N/A
Display brightness This item is used to setup the brightness for display. (Range 0~100) 50
Touchscreen
Calibration
This feature is used to calibrate the touchscreen for best result. N/A
Date & Time This item is used to setup the date and time on display. N/A
Security This feature is used to set the password for locking the menu or
favorites. The default password is 8888.
Disable
Cutter type This item is used to set the cutter type. Guillotine
Ribbon Low Warning This item is used to set the warning for ribbon low. For example, if
setting value is 30m, when ribbon capacity was lower than 30m, the
will be shown in red.
30M
Printer head
maintenance
This item is used to check print head status and to set the settings
for print head care.
Item Description
Warning This item is used to enable/disable the print
head clean warning. If enable this feature, once
print head has been reached the setting
mileage then the warning icon will be shown on
printer UI for reminding user to clean the print
head. The default setting is disable.
Reset counter This item is used to reset the print head clean
warning mileage after cleaned print head.
Interval This item is used to set the expected mileage
for reminding user to clean the print head. You
have to enable the “TPH warning lock” for use.
The default setting is 1 km.
Key sound This item is used to enable/disable the sound
of front panel buttons.
N/A
Contact us This feature is used to check the contact information for tech
support service.
N/A