25
+31(0)78 - 615 20 33
[email protected]
www.altec.nl
+32(0)2 - 270 34 88
[email protected]
www.altec.be
NL
BE
4.4.3
Loading media in peel-off mode (optional)
1.
Open the printer right side cover.
2.
Please refer to section
4.4.1
step 4-8 for loading
media.
3.
Use the front display panel to do the calibration first
and set the printer mode to peeler mode.
Note
1.
Please calibrate the gap/black mark sensor before
loading media in the peel-off mode to avoid paper
jam.
2.
Please feed the label through media guide bar as
shown in the picture.
4.
Open print head release lever, pull approximately
650 mm of the label through the front of the printer.
5.
Remove several labels to leave liner.
