4
+31(0)78 - 615 20 33
[email protected]
www.altec.nl
+32(0)2 - 270 34 88
[email protected]
www.altec.be
NL
BE
Important safety instructions
1.
Read all of these instructions and keep them for later use.
2.
Follow all warnings and instructions on the product.
3.
Disconnect the power plug from the AC outlet before cleaning or if fault happened.
Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.
4.
The mains socket shall be installed near the equipment and easily accessible.
5.
The unit must be protected against moisture.
6.
Ensure the stability when installing the device, Tipping or dropping could cause damage.
7.
Make sure to follow the correct power rating and power type indicated on marking label provided by manufacture.
8.
Please refer to user manual for maximum operation ambient temperature.
Warning
•
Do not throw the battery in fire
•
Do not short circuit the contacts
•
Do not disassemble the battery
•
Do not throw the battery in municipal waste
CAUTION
•
For operation safety, please turn off the power by the power switch before opening the media cover to load
labels, ribbons, or to repair. After completing the steps, please close the media cover first and then turn on the
power to start printing.
•
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
•
Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.
•
Hazardous moving parts, keep fingers and other body parts away.
