22
+31(0)78 - 615 20 33
[email protected]
www.altec.nl
+32(0)2 - 270 34 88
[email protected]
www.altec.be
NL
BE
4.
Push the print head release lever and install the label
through the damper, media sensor, and label guide
to install the media.
5.
Move the media sensor by adjusting the media sensor position adjustment knob, make sure the gap or
black mark sensor is at the location where media gap/black mark will pass through for sensing.
6.
Adjust the label guide to fix the media position.
Note
•
Please install the media through the media sensor
•
The sensor location is marked by a triangle mark
⯆
(gap sensor) and arrow mark (black mark sensor)
at the sensor housing.
•
The media sensor position is movable, please make
sure the gap or black mark is at the location where
media gap/black mark will pass through for sensing.
Black mark sensor ( )
Gap sensor (
⯆
)
