Altec ATP3000, Руководство пользователя

Страница: 16 / 63

15
+31(0)78 - 615 20 33
info@altec.nl
www.altec.nl +32(0)2 - 270 34 88
info@altec.be
www.altec.be
NL BE
3.1.3 Power-on utilities
The ATP-3000 has power-on utilities to set sensor calibration, self-test, and factory default functions.
Please refer to the template below to setup the settings.
Please follow the steps below for different power-on utilities:
1. Turn off the printer power switch.
2. Hold on the right side of the select key (
) then turn on the power switch.
3. Release the button when LCD monitor indicates with different functions.
4. Printer will setup the functions showing on the LCD monitor accordingly.
Sequence of the settings
Power-on utilities LED color will change in the following pattern
LED color
Functions
Amber Red
(5 blinks)
Amber
(5 blinks)
Green
(5 blinks)
Green / Amber
(5 blinks)
Red / Amber
(5 blinks)
Solid green
(5 blinks)
Sensor calibration
(Gap / Black mark sensor)
Release
Self-test
(and enter dump-mode)
Release
Factory default Release
Bline calibration Release
Gap calibration Release
READY (Skip AUTO.BAS) Release