Alpine INE-W967HD, Краткое руководство пользователя

Страница: 155 / 255

Chevrolet/GMC
FULL SIZE TRUCK z 17/17
Troubleshooting Guide
Symptom Possible Cause Remedy
1 iDatalink website says
serial number is invalid. Serial number may not be in
iDatalink database. Call ADS at 1-866-427-2999 and verify.
2 Headunit will not turn on. Incorrect serial number was
used when flashing maestro. Flash Maestro with correct serial
number.
4 pin Maestro data cable is
disconnected or damaged. Check for proper connection or
disconnected pins.
OBD2 cable is not plugged in. Connect OBD2 connector to the OBD2
port.
Monitor, key-harness or main
harness are not connected. Check for proper connection or
disconnected pins.
3 Cannot enter SETTINGS
MENU. Vehicle is in motion or parking
brake is not engaged. With vehicle in (P)PARK engage the
parking brake. Release the parking
brake and engage the parking brake a
second time.
4 The Factory Onstar Voice
Recognition system is too
sensitive. When you press the Onstar
button on the mirror, noises in
the vehicle may be recognized
as voice commands. In addition
radio key presses may also be
recognized as voice commands
while the Onstar is active. Set the KEY BEEP TO “0” in radio
settings menu.
5 On the climate screen, the
power, recirculate, Rear
Defroster, Front Defroster
and AC buttons do nothing
when pressed. This is normal. These are only status icons. They are
not buttons. They will turn yellow when
selected.
6 Cannot control the DVD
Player properly. DVD has not been set on the
SETUP menu. Ensure DVD is ON in HDMI SETUP
menu.
HDMI box has not been set on
the SETUP menu. Ensure DVD is ON in HDMI SETUP menu
and remote loop was cut on the wire
harness.
7 Sound mutes when vehicle
is shifted into reverse. Mute on reverse is turned on in
the SOUND menu. Change Mute on reverse to off.
8 Only the front speakers are
on for SXM Radio. SXM Tuner has not been
activated Activate SXM Tuner.
9 The vehicle is incorrectly
positioned on the
Navigation display. Poor GPS signal. Ensure the recommeded GPS antenna
route was used. See page 12.