Alpha ALPHA6000 Series, Руководство пользователя

Страница: 139 / 243

Chapter 5 Parameter Introductions
http://www.acdrive-china.com
139
Preset Timing
arrivingP3.25
Timing drive
input terminal
Timing drive timing
Timing drive
signal output
Fig. 5-3-7 Timing drive input
50: Counter's trig signal input
◆
This terminal is used for pulse input to the internal counter of the ac drive. The highest
pulse frequency is 400 Hz. The present counting value can be saved when power off.
51: Counter clear
This terminal is used to clear the counter to zero .The terminal function is in
conjunction with Counter's trig signal input.
52: Actual Length clearing
When terminal 52 is enabled, the setting of P8.01 (actual length) will be cleared to
zero.
54: PUL: Pulse input
◆ For 3004GB and below models, only multi-function input terminals X4 and X5 can
be defined as this function; for 35R5GB/37R5PB and above models, only
multi-function input terminals X7 and X8 can be defined as this function . The input
pulse frequency can be used as frequency reference. See Parameter Group P4 for the
relationship between input pulse frequency and the reference frequency.
55: Single-phase speed measuring input
◆ Only multi-function input terminals X7 and X8 can be defined as this function. See
the control circuit wiring details in section 2.5 and 2.6. The speed control accuracy is
±0.1%. Single-phase speed feedback control can be realized by using this terminal and
PG.
56
～ 57: Speed measuring input SM1/SM2
◆
For the ac drive model of 3004GB and the below models, Only multi-function input
terminals X4 and X5can be defined as this function. For the ac drive model of
35R5GB/37R5PB and above models, only multi-function input terminals X7 and X8
can be defined as this function. See the control circuit wiring details in section 2.5 and
2.6. The speed control accuracy is ±0.1%. Dual-phase speed feedback control can be
realized by using this terminal and PG.