18
We reserve the right to modify technical specifications without prior notice.
83050800aUK – Translation of the operating manual
© Alpha-InnoTec GmbH
then, on the opposite side, latch the
lugs on
the masking plate
from the bottom up
into the
slots provided in the front panel…
Finally, press the upper latching lugs of the masking
plate into the slots provided in the front panel.
dismantling the masking plate
In order to dismantle the masking plate, the latching
lugs must be completely released
on one side first
by
pushing
towards the middle of the masking plate
.
Then release the lugs on the opposite side.
installation and removal of the
screen
installing the sCreen
note.
The masking plate is provided in the as delivered
unit so that the control panel is inserted in the
upper recesses of the front panel.
If the control panel has been inserted in the
lower recesses of the front panel, you must first
remove the masking plate's dummy cover and
then reinsert it above the logo.
screen at time of delivery:
1 Recess for control panel
2 logo
3 dummy cover
First, insert the masking plate
below
in the slots
provided in the front panel…
Then, beginning on one side, latch the
lugs on the
masking plate
from the bottom up
into the slots
provided in the front panel…
