9
We reserve the right to modify technical specifications without prior notice.
83050800aUK – Translation of the operating manual
© Alpha-InnoTec GmbH
installation
The following applies to all work to be done:
note.
Always comply with the relevant local accident
prevention regulations, statutory regulations,
guidelines and directives.
WarnIng!
only qualified personnel may install and
assemble the heat pump or heat pump
system!
note.
note the sound information for the respective
model.
“Technical data / scope of delivery” overview,
“sound” section.
installation room
Important
Install the heat pump inside buildings only.
The installation room must be frost-free and
dry.
WarnIng!
please note and follow the respective
relevant local standards, guidelines,
directives and regulations, especially
the minimum room volume necessary
depending on the quantity of refrigerant in
the relevant heat pump system (en 378-1).
Refrigerant
limit
R 134a
0.25 kg/m³
R 404A
0.48 kg/m³
R 407c
0.31 kg/m³
R 410A
0.44 kg/m³
“Technical data
/
scope of supply” overview,
“General unit data” section.
minimum room volume =
Refrigerant capacity [kg]
limit [kg/m³]
note.
If several heat pumps of the same type
are installed, only one heat pump must be
considered.
If several heat pumps of different types are
installed, the heat pump with the largest
refrigerant contents must be considered.
transport to installation loCation
Always comply with the following safety information
during transport:
CautIon!
Wear safety gloves.
WarnIng!
several people are required to transport
the unit. take into account the weight of
the unit.
“Technical data / scope of delivery” overview,
“General unit data” section,
WarnIng!
the unit can tilt and tip over when
being removed from the wooden pallet
and during transport. this can result in
personal injury and damage to the unit.
– take suitable precautions to prevent
the risk of tipping over.
CautIon!
always secure the unit against slipping
during transport.
Important
never use components and hydraulic
connections on the unit for transport purposes.
Important
do not damage the hydraulic connections under
any circumstances.