4
We reserve the right to modify technical specifications without prior notice.
83050800aUK – Translation of the operating manual
© Alpha-InnoTec GmbH
intended use
The unit is only to be used for its intended purpose. This
means:
•
for heating.
•
for domestic water heating.
The unit must be operated only within its technical
parameters.
“Technical data / scope of supply” overview.
note.
notify the responsible power supply company of
the use of a heat pump or heat pump system.
Disclaimer
The manufacturer is not liable for any damage or losses
resulting from use of the unit which is not its intended
use.
The manufacturer's liability also expires:
•
if work is carried out on the unit and its
components contrary to the instructions in this
operating manual.
•
if work is improperly carried out on the unit and
its components.
•
if work is carried out on the unit which is not
described in this operating manual, and this
work has not been explicitly approved by the
manufacturer in writing.
•
if the unit or components in the unit have been
altered, modified or removed without the explicit
written consent of the manufacturer.
eC conformity
The unit bears the cE marking.
Ec declaration of conformity
safety
The unit is safe to operate for its intended use. The
construction and design of the unit conform to current
state of the art standards, all relevant dIn/vdE
regulations and all relevant safety regulations.
Every person who carries out work on the unit must
have read and understood the operating manual before
starting any work. This also applies if the person
concerned has already worked with such a unit or a
similar unit or has been trained by the manufacturer.
Every person who carries out work on the unit must
comply with the relevant local accident prevention and
safety regulations. This especially applies to the wearing
of personal protective clothing.
WarnIng!
risk of fatal electric shock!
electrical connection work must be
carried out by qualified electricians only.
Before opening the unit, safely disconnect
the system from the power supply and
prevent it from being switched back on!
WarnIng!
only qualified personnel (trained heating,
refrigerating system and refrigerant
engineers and electricians) may carry out
work on the unit and its components.
WarnIng!
note and follow the safety stickers on and
in the unit.
WarnIng!
unit contains refrigerant!
Leaking refrigerant could result in
personal injury and environmental
damage. therefore:
– switch off system.
– thoroughly ventilate installation
room.
– notify the manufacturer’s authorised
service centre.
Important
For safety reasons:
never disconnect the unit from the power
supply, unless the unit is being opened.
