Alltech KEENAN MechFiber380, Руководство оператора

Страница: 19 / 73

KEENAN
MechFiber380 Operator’s Manual
Revision D02 09
th
Sept 2020
19
7.5 Operating the KEENAN MechFiber diet feeder
Table 2: Loading the KEENAN MechFiber diet feeder
LOADING THE KEENAN MECHFIBER DIET FEEDER
GENERAL
• Park on level ground.
• Ensure variable feed control (VFC) door is closed.
• Do not start PTO when VFC-door is open.
LOADING AND MIXING SEQUENCE
• Load feed as close to the loading side of the unit as possible.
• Load concentrate feeds along the length of the machine.
• Load forages to the front, back and centre of the unit in alternate grabs during mixing.
• Remove all twine, wrap or polythene from bales.
• Round or square bales should be split or broken into a
minimum of 4 pieces.
Use front grab or forks as required.
• Stop PTO before moving to feed-out area.
• Mixing time will depend on the required chop length.
Below is a guide to the correct loading order. Consult your local InTouch
office/nutritionist for more guidance on the best loading order for your ingredients.
Order Feed ingredients Paddle RPM Tractor engine speed
1st Straw, hay
All at 6
–8 RPM
1,400
–1,600 RPM
2nd Water, liquid feeds
3rd Minerals, concentrates, protein
meals, pulps, cereal grains
4th Grass silage
5th Maize silage