KEENAN
MechFiber380 Operator’s Manual
Revision D02 09
th
Sept 2020
12
Note: the machine is supplied with a top knife guard, which can be found inside
the driveline covers of the diet feeder.
7. Use a suitable and secure ladder for access to and from the diet feeder.
Note: The ladder at the rear of the machine is provided only as a means of
viewing the ration and should not be used to enter the mixing chamber.
8. Always maintain three points of contact while entering, exiting and moving within
the mixing chamber of the machine.
9. When entering the base of the body, it is recommended that you cover the body
blades in the vicinity of where the work will be carried out.
10. When removing trapped objects, be aware that some machine components may
move unexpectedly when cleared.
11. Take extreme care when moving around inside the body, as surfaces may be
slippery.
SODA GRAIN:
Additional safety instructions and warnings are covered and available in the
soda grain leaflet, which
should be read carefully before soda-treating grain. When finished
treating grain, clean out any remaining material in the mixing and/or auger chamber by
loading in 200
–300 kg of silage or 50 kg of straw, and allow the machine to mix before
unloading in the normal manner.
Note: When mixing soda grain, the maximum gross load
that can be mixed in the KEENAN MechFiber380 is 7,500 kg.
The soda grain process can be completed using a KEENAN mixer, but before treatment on
your farm, make sure you are adhering to local animal feed legislation and health and safety
guidelines involving the treatment of grain.
WARNING:
Failure to follow the safety guidelines above may lead to accident or injury.
Figure 3a: Body blade and blade cover
Figure 3c: Breakaway safety brake
Blade
When entering the mixing
chamber, always fit the safety
beading that is provided for the
top knife.
Figure 3b: Top knife protection
When entering the mixing
chamber, always fit the safety
beading that is provided for
the top knife.
Blade
Содержание KEENAN MechFiber380
