Alltech KEENAN MechFiber380, Руководство оператора

Страница: 36 / 73

KEENAN
MechFiber380 Operator’s Manual
Revision D02 09
th
Sept 2020
36
Machine: Before storage, wash the complete machine, then grease or oil
all weekly lubrication points as above. Open the drain bung in
the mixing chamber. Check tyre pressures. Store the machine
under cover or under a tarpaulin, if possible.
Electronic weigh box: If the machine is to be stored, remove the weigh box unit from
the machine and keep in a dry place. Lightly grease the load cell
cable connector end and place into a plastic bag.
Wheels: Remove and inspect wheel hub. Replace worn parts, redress
and re-fit.
Blades: Blades need to be kept sharpened. This will have to be done
without taking the temper from (overheating) the blades. If the
machine is operated with blunt blades, it will place major stress
on the drive system. Blades may have to be replaced when it is
no longer practical to sharpen them.
10 Specification
10.1 Weight
Table 8: Machine weights
Note:
Weights may vary depending on exact specifications.
* The pre-mix or caustic soda capacity is 7,500 kgs/17,600 lbs., due to its nature in weight and density.
Further advisements can be found in Sections 7.3 (on diet feeder capacity) and 7.4 (on loading and mixing).
WARNING:
Due to the hazards of entering the mixing chamber, it is recommended that all blade
replacement is carried out by a KEENAN-authorized service agent who is specially
trained to do this. Contact your local agent (see back cover for details).
Model weight MechFiber380 MechFiber380 bale handler
Unladen
kgs 12,750 13,750
lbs 28,110 30,314
Payload
kgs 9,000 9,000
lbs 19,840 19,840
Gross
kgs 21,750 22,750
lbs 47,950 50,154