Deploying the SG-9500
6-2
SG-9500 Hardware Guide
NOTE When the In-line platform is powered on it validates that it is connected to a
bypass. If you attempt to power on an In-line platform that is not connected
to a Bypass, boot will fail.
Figure 6-1: Connecting to Network Traffic
4.
Make sure all cables are secure.
5.
Power up the In-line platform and verify the traffic flow.
See page 2-1 for details concerning connecting HD 4, HD 8, HD 16 and HD 24 Bypass
units to the SG-9500 and the network.
CAUTION
The bypass cable should only be connected/disconnected when the
system is powered down.