Connectors and LEDs
2-7
SG-9500 Hardware Guide
Different
kinds of transceivers (Copper, 1G Fiber and 10G Fiber) may be mixed
on a single 1G/10G NIC card.
LINK/ACT LEDs
for each connection are located together to the left of the
interfaces.
NOTE 1G Copper interfaces may only use the 8 Port Bypass Unit is available, limiting
the number of ports which may be used on the SG-9500.
•
MONITOR port
. The port is implemented as D-Type connection for
connection of an external monitor.
•
M1 – M4
may be used for system monitoring and maintenance. M2 acts as
a redundant port for M1. There are total 4 management ports (2 out of
the 4 are selected for use):
M1 & M2 - RJ45 copper 1G ports
M3 & M4 - SFP+ that can accommodate 1/10G optic interfaces
•
USB Ports
should only be used to connect the SG-9500 to the Bypass unit
or for keyboard/mouse connection during initial configuration.
CAUTION
The bypass cable USB connections should only be
connected/disconnected when the system is powered down.