Introducing the SG-9500
1-4
SG-9500 Hardware Guide
SG-9500 Configuration B
•
SG-TRANSCE-10G-LR
•
SG-TRANSCE-10G-SR
•
SG-TRANSCE-1G-COP-A
•
SG-TRANSCE-1G-LX5-A
•
SG-TRANSCE-1G-SX-A
•
SG-TRANSCE-100G-SR4-A
•
SG-TRANSCE-100G-LR4-A
NOTE The switch/router connected to 1G interfaces must be manually configured to
1G/Full. The Service Gateway will be configured automatically by the software
to 1G/Full.
1G Fiber interfaces must be set as Full Duplex.
1G Copper interfaces may only use the 8 Port Bypass Unit if available, limiting
the number of ports which may be used on the SG-9500.
Connectors
The SG-9500’s 8-port and 16-port Fiber Bypass Units use Multi Mode fiber (MM) or
Single Mode fiber (SM) dual LC Connectors. The 24-port Fiber Bypass unit and the 4
ports Fiber Bypass unit uses MTP Fiber connectors. The 8-port Copper Bypass Unit
uses dual RJ45 connectors.
Figure 1-1 – Full Duplex LC Connector
NOTE Color and appearance of actual connectors may vary
.