Bypass
3-9
SG-9500 Hardware Guide
links are switched into Bypass. There is no way to have a single link go into bypass
independently.
HD 24 Fiber Bypass Unit LEDs Description
The following indicators can be used to identify the operation of the blade:
•
Mode LED
is
STEADY GREEN
when the Bypass Unit is operating normally
and
OFF
when all Links are in Bypass mode.
HD 24 Fiber Bypass Unit Front Panel Connectors
•
Network Ports 1-24
connect to your network.
These ports are split into
twelve blocks of four, each representing a link. Be sure to insert the
Internal and External connectors into the correct ports on the Bypass Unit.
Internal is on the left of each link and External is on the right. In addition
please note that the in each Duplex LC connector on the Bypass unit’s
front panel the Tx connector is the left LC connector and the Rx is the right
LC connector.
•
System Ports 1-4, 5-9, 10-14, 15-19 and 20-24
connect to the SG-9500.
These MTP connectors can be used with Fan-out patch cables which each
handle 2 10G links (4 10G ports total).
•
Primary
connects to a USB port on the SG-9500
•
Secondary
is not used at this time.