Allmand Maxi-Air MA375-DP T4F, Руководство оператора

Страница: 61 / 88

Not for
Reproduction
61
Maintenance
5-9
[How to use booster cables]
1.
Stop the engine.
2. Connect one end of the (+) booster cable to the (+) terminal
of the machine battery.
3. Connect the other end of the (+) booster cable to the (+)
terminal of the external battery.
4. Connect one end of the (–) booster cable to the (–) terminal
of the external battery.
5. Connect the other end of the (–) booster cable to the
engine block of the machine.
6. Start the engine.
7. Disconnect the booster cables by following the procedure
in the reverse order.

Do not connect (+) and (–) terminals backwards. Doing so could result in an explosion.
Check and clean air filter element
Every 250 hours
1.
Loosen the cap latch [B] at the cap [A], then remove the
cap and clean inside.
2. Remove and clean the element [C] & [D].
3. Clean the inside of the case [E].
4. Install the element.
5. Install the cap and fasten it with the cap latch.
 If the element is extremely dirty or worn, replace it with a
new one.
(For part number, See “Replacement Parts.”)

A dirty or worn element could result in engine damage or shortened engine life. Be
sure to regularly check and clean the element
.
A150824
E
For engine
For compressor
A180126
Machine battery
External battery (12V)
Connect to the engine block
of the machine
D
B
A
E
C
B A