Allmand Maxi-Air MA375-DP T4F, Руководство оператора

Страница: 30 / 88

Not for
Reproduction
30 ALLMAND.COM
Operation
3-11
Check belt tension
Follow the procedure below to adjust tension of the belt.
1. Visually check for cracks or tears in the belt.
2. Belt deflection should be 0.39 to 0.47in. (10 to 12mm)
when you depress the middle of the belt with your finger
with a force of 98N
･
m (10kgf
･
m).
3. Adjust the tension by gradually loosening the fastening
bolt [A] or nut [B] of the alternator. After adjusting, be
sure to tighten lock bolt or lock nut firmly.
4. Make sure to not get any grease or LLC (Antifreeze) on
the belt. Wipe off completely.
 Attempting to check or adjust belt tension while the
machine is in operation could result in death or serious
injury. Before checking or adjusting belt tension:

Stop the engine and remove the starter key.

Remove the negative (–) cable from the battery.
 Overtightening the belt could result in damage to the belt, shafts, or bearings.
 A loose belt could result in belt slippage and premature belt wear.
Opening and closing doors
Pull the handle forward to open the door. Be sure to close the door tightly so that its latch is firmly caught.
 Keep the door closed and locked while running the
unit.
 If the door has to be opened, keep hands away from
rotating parts or hot components.
A150807
Depress the middle of the belt
with a finger.
This deflection should be
0.39 to 0.47in. (10 to 12mm).
D003
A B
TR0304