Allmand Maxi-Air MA375-DP T4F, Руководство оператора

Страница: 24 / 88

Not for
Reproduction
24 ALLMAND.COM
Operation
3-5
Check before starting unit
Make sure to check the unit before operation.
If an issue is found, be sure to repair it before operating the unit.
Make sure to make daily checks before operation.
 Failure to perform regular equipment checks could result in death or serious injury, or in
equipment damage.
Check engine oil level
Unit should be on a level surface before checking oil level.
Wait 10 to 20 minutes after stopping the engine before checking the oil level.
1. Pull out the oil level gauge and wipe it with a clean cloth.
2. Insert the oil level gauge fully and pull it out again. If the oil level gauge shows the oil level between LOW
and HIGH, it is normal.
3. If the oil level is below its LOW, add engine oil from the oil filler port [A].

While checking oil level, check also for contamination. If the oil is dirty, contaminated, or should be
changed according to the periodic inspection list, change the oil. (See “Change Engine Oil” in
Maintenance)

When adding oil, do not overfill.
A150804
A
Oil level gauge
LOW
HIGH
When oil level is within
this zone, it is normal.