Not for
Reproduction
64 ALLMAND.COM
Maintenance
5-12
Clean strainer in the scavenging orifice
Every 500 hours
1.
Remove the pipe [A] using a wrench.
2.
Remove the bushing [B].
3.
Remove the strainer [C]
4.
Wash the removed strainer in diesel oil and blow out dust
and debris with compressed air.
5.
After cleaning, install the strainer again in the reverse
procedure.
Change fuel filter and fuel pre-filter element
Every 500 hours
1.
Remove the filter element [A] using a filter wrench.
2.
Spread a thin film of fuel oil on the gasket [B] of the new
filter and screw it in.
(For part number, See “Replacement Parts.”)
3.
After the gasket touches the pump, tighten it 2/3 turn using
a filter wrench.
4.
Bleed the air from the fuel.
(See “Air Bleeding in Fuel
Line.”)
5.
After installing the fuel filter, be sure to check for leakage
during operation.
For additional information, refer to the engine operator’s
manual.
H000049
A120175
Separator
receiver tank
A
B
C
B
A
Содержание Maxi-Air MA375-DP T4F
