Not for
Reproduction
58 ALLMAND.COM
Maintenance
5-6
Maintenance Items
Change engine oil
At 50 hours for the first change and at every 500 hours thereafter
1.
Remove the drain plug [A], open the drain valve [B], and
drain the engine oil into an approved container.
2.
After used engine oil is fully drained, close the drain
valve [B], install the drain plug (A), and add new engine
oil through the oil filler port [C].
[Oil Capacity: approx. 13L]
3.
After adding oil, remove the dipstick [D] and wipe it off.
4.
Insert the dipstick [D] fully and remove it again. If the
dipstick shows the oil level is between LOW and HIGH,
it is normal.
5.
Once oil is added, close the oil filler port [C] and replace
the dipstick [D].
A150809
After stopping the engine, wait
for 10 to 20
minutes until the engine oil cools off. Then check
the level of the engine oil, or refill or drain the oil.
Engine oil is very hot and highly pressurized during or
just after operation. Hot oil could blow out of the tank
and can cause scalding.
Never supply more engine oil than the proper level.
Too much oil could result in engine damage.
A150804
Caution in adding or draining engine oil
HIGH
A B
Dipstick
LOW
Approved container
CLOSE OPEN
C
D
When oil level is
within this zone, it
is normal.
H990432
Содержание Maxi-Air MA375-DP T4F
