background image

EXCLUSION OF LIABILITY

The present manual by Allied Data Technologies BV (hereinafter referred to as AD Technologies)
reflects the present state of the art of the products described therein. We have endeavored to
give a description that is as complete and clear as possible in order to make work with our
p roducts  as  easy  as  possible  for  you.  All  the  same,  the  manual  may  contain  technical
inaccuracies and typing errors. As a result of the rapid advance in the art, we must also reserve
the right to incorporate technical alterations and developments without separate advance notice.
That is why AD Technologies does not give any warranty for the contents of the manual and for
its continuing applicability.

Nor is AD Technologies liable for any loss of information or any incorrect use of information that
might result from consultation of the manual. Particularly, AD Technologies is not liable for
damage, nor indirect damage (including damage caused by financial loss, delays affecting
business transactions or interruptions of business and similar consequences), arising from the
use or improper use of this manual, not even in the case where it was pointed out to AD
Technologies or an agent of AD Technologies that such damage might be sustained. This does
not, of course, affect our legal liability for damages based on any intent or gross negligence.

With respect to the data given in this manual, AD Technologies does not warrant the non-
existence of industrial property rights (trademarks, patents, utility models, etc.). Nor are trade
names, brand names, company names and product names in general use but are subject to the
relevant trademark, patent, utility model and registered design rights.

The information must neither in whole nor even in part be copied, translated, reproduced or in any
other way transferred to or stored on any electronic medium or other machine.
The purchase and use of software are governed by the General Conditions of Delivery and
Payment as well as the Terms of Licence of AD Technologies.

If any of the provisions on the exclusion of liability or on use are or become ineffective for
statutory reasons, this will not affect the other provisions.

© July 1998 -  Manual TRONSecure 33.6 doc.

Web-Jet , TelTron, TRON-DF, QuaTron, Tele-Talk, Triterm, Trion, Duon, and VidiTron

are registered trademarks of Allied Data Technologies BV.

TRON SECURE 33.6

Allied Data Technologies BV - 

Allways one step ahead

1

ALLIED DATA TECHNOLOGIES BV
P.O.Box 788
NL-3200 AS  SPIJKENISSE
The Netherlands

Содержание TRON SECURE 33.6
































































Отзывы: