Allied Data Technologies TRON SECURE 33.6, Руководство пользователя

Страница: 25 / 63

When a ‘break’ is received from a remote modem, the following happens:
0 - Empty the data buffers and send a ‘break’ to the terminal
1 - Like 1
2 - Send a ‘break’ to the terminal immediately
3 - Like 2
4 - Send a ‘break’ to the terminal with the data; processing takes place in order
of sending
5 - Like 4 (default)
AT-K MNP extended services MNP10
This command determines whether a V42 LAPM connection is converted to an MNP10
connection.
0 -
Conversion off (default)
1 - Conversion on
ATL Loudspeaker volume
The modem controls the volume of the loudspeaker.
0 -
Volume low
1 - Volume low
2 - Volume medium (default)
3 - Volume high
N.B. Use the ATM command to switch off the loudspeaker
ATM Loudspeaker control
0 -
Loudspeaker off
1 - Loudspeaker off during reception of the carrier (default)
2 - Loudspeaker always on
3 - Loudspeaker off during dialling and connection, but on during the answering
period
AT&M Synchronous mode
This command determines the working of the (CT108) in cooperation with the AT&Q
command.
0 -
Direct asynchronous mode.
Attention : The command AT&M0-\N0 selects the normal buffered mode while
the command AT\N0&M0 selects the direct mode
1 - Selects synchronous connection mode and asynchronous off-line command
mode
2 - The same as AT&M1 with this difference that the modem starts to dial the
number of memory 0 (See AT&Z) when DTR becomes active
3 - This is a synchronous mode at which DTR (CT108) functions as voice/data
switch. The call is initiated manually while DTR is not active. When DTR
becomes active, an originate or answer connection is built up (see S14 bit 7)
NB: Synchronous - and direct modes are not supported in this modem.
This command is maintained for compatibility reasons.
TRON SECURE 33.6
Allied Data Technologies BV - Allways one step ahead 25