Allied Data Technologies TRON SECURE 33.6, Руководство пользователя

Страница: 41 / 63

AT*P Programm Dialback entries
This command should be used to program each of the 100 dialback entries,
ranging from 0 to 99. For each entry a password can be entered of min. 4 and
max. 8 characters.
Each entry also holds the number which should be called, with a maximum of
16 digits. Also programmable for each entry is the DES option.
Entries may be programmed in lower and uppercase characters.
However, lowercase will be converted to UPPERCASE characters.
Syntax: AT*P Programm Dialback entries
AT*Pn: delete entry n
AT*Pn:password:xxxxxx
entry n is programmed with
password and dialbacknumber
xxxxxx
AT*PDEL Delete all entries
Examples: AT*P15:GATES:0545477763:1
Programm entry 15 with the
password GATES and the dialback
number 0545477763, during dialback
DES will be active
AT*P13:pluto:0715737179:0
This will programm entry 13 with the
password ‘PLUTO’, the dialback
number is 0715737179, DES will be
off during dialback
AT*P13::1 Do not change password and
dialback number, but switch on DES
for entry 13
AT*P15::0 Switch off DES for entry 15
AT*P12: Erase entry 12
ATS15 Change/show time before dialback
Set the time (in seconds) before
dialback. The modem will wait this
before dialback, the default is 120
seconds, range: 5-255 seconds
Use AT&W to make this setting
permanent.
Syntax: ATS15=nn Change the dialback time to nn
seconds
ATS15? Show the current dialback time
TRON SECURE 33.6
Allied Data Technologies BV - Allways one step ahead 41