Modify Cycle Menu
The Modify Cycle Menu allows the user to manually program cy-
cles through the control by modifying existing cycles or by creat-
ing new cycles.
1. Simultaneously press the and keypads with Service Door
open and the Coin Vault closed to enter the
2. Press the and keypads to highlight MODIFY CYCLE .
3. Press the keypad to enter the Modify Cycle Menu.
For programming steps, the Modify Cycle Menu changes to the Step Menu.
Cycle Programming**
Display
Description
Value Range
BACK
-
CYCLE #01-09
Default cycle number. Select a cycle from
the list to modify.
There are 9 default cycles. Refer to
.
BACK
Select to return to higher menu.
-
STEP #01-72: <Step Name>
Step number and type. Only steps in the
selected cycle are listed. Available param-
eters and value ranges differ for each step
type. Refer to
.
Reuse Fill, Fill, Supply, Agitate, Soak,
Cool Down Drn, Drain, Extract Drain, Au-
dio, Hold
BACK
Select to return to higher menu.
-
TYPE
Select to change the step type. Available
parameters and value ranges differ for
each step type. Refer to
Reuse Fill, Fill, Supply, Agitate, Soak,
Cool Down, Drain, Extract Drain, Audio,
Hold
STATE
Select to enable, disable or modify the
step.
Enable, Disable, Mod 1-3, Always Ena-
ble
LABEL
Select to change the step label.
Prewash, Wash, Rinse 1-4, Spin, Bleach
<Parameter Name>
Name of parameter. Select a parameter
from the list to view or modify the current
value. Available parameters and value
ranges differ for each step type. Refer to
Modify an existing or copied cycle
.
.
COPY STEP
Select to choose and copy an existing step. -
INSERT STEP
Select to place and insert a new cycle step.
Refer to
-
**Refer to
for default cycle setting information.
Table 5
Modify Cycle Menu
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
29
Part No. 806526ENR2
Содержание Quantum Platinum
Страница 2: ......
