ALLIANCE Quantum Platinum, Программирование

Страница: 81 / 82

Default Cycle Time
The cycle times listed are the default cycle times programmed at
the factory. The cycles can be made longer or shorter by reprog-
ramming the fill/agitate times. Refer to Cycle Programming to
change these times. NORMAL/COLD is the default cycle.
Normal, Perm Press and Delicate Cycles
Description Step Number Step Type
Step Time (Minutes:Sec-
onds)
Initial Drain 1 Extract 0:10
Prewash (Active with Mod1
only and using wetting fill) 2 Fill 2:30
3 Supply 0:30
4 Agitate 1:30
5 Cooldown -
6 Extract 2:00
Wash (Using wetting fill) 7 Fill 2:30
8 Supply
Detergent/Bleach; ES1, ES2
0:30
9 Agitate Normal = 1:30
Perm Press = 1:15
Delicate = 1:00
10 Agitate (Active only with
Mod3 inactive) Normal = 1:30
Perm Press = 1:15
Delicate = 1:00
11 Cooldown -
12 Extract Normal & Perm Press = 4:20
Delicate = 4:05
Rinse 1 (Active only with
Mod3 inactive) 13 Fill 2:00
14 Agitate 0:35
15 Extract Normal & Perm Press = 4:20
Delicate = 4:05
Table continues...
Default Cycle Time
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
81 Part No. 806526ENR2