Special Features
Lucky Cycle
The Lucky Cycle option allows the owner to program the ma-
chine to provide a free or reduced vend cycle to users after a cer-
tain number of machine cycles have occurred or on certain dates
and times. Refer to
for manual programming or
use an IRDA device or Network. Refer to
.
Speed Cycle
Speed Cycle allows the owner to program special cycles that save
the user time by providing a shorter total wash time. The owner
can program the Speed Cycle with distinct vend prices and func-
tions. Refer to
for manual programming or use an
IRDA device or Network. Refer to
Break-In Alarm
This feature allows the owner to program the machine to signal a
network alarm, cause a machine alarm or shut down the machine
if the service door or coin vault is opened without disabling the
alarm first. The date and time of the break-in is recorded. To
avoid the alarm during coin collections, the alarm must be turned
off or temporarily disabled by pressing the two programmed
keys.
The alarm is turned off by default. The alarm can be turned on by
programming the control with an external device or network.
Special Vend
The Special Vend option allows the owner to set a special vend
price or free vend between specific times of day, days of week,
dates, months and years. The owner can program the control for
up to eight Special Vends periods. The owner can manually pro-
gram Special Vend 1 and can only enable or disable Special
Vends 2-8. Full programming of all Special Vends requires the
use of an IRDA device or Network. Refer to
for
manual programming.
Increased Water Levels
Increased Water Levels is a modifier option that can be enabled/
disabled for the Cycle Modifier Key #1 and Key #2 options. Re-
fer to
. If enabled, a cycle containing Prewash,
Wash, or Rinse Fill or Reuse Fill steps would ignore that pro-
grammed water level and instead use the Increased Water Level
for Prewash, Wash, or Rinse steps.
Increased Spin Speed
Increased Spin Speed is a modifier option that can be enabled/
disabled for the Cycle Modifier Key #1 and Key #2 options. Re-
fer to
. If enabled, a cycle containing Extract steps
with the Spin step would ignore the cycle programmed spin speed
and instead attempt the Increased Spin Speed parameter’s global-
ly programmed value.
Supply Injection
This option can be programmed for machines that are equipped
with supply injection.
When the Supply Injection prompt parameter is enabled, refer to
, the user will be prompted to accept and/or pay for
external supplies with the start of a cycle. A cycle programmed
with external supply signals that would normally trigger during
cycle operation would be restricted from activating if the prompt
is enabled, unless the feature was accepted and/or paid for during
the prompt at the beginning of the cycle. Cycle execution should
halt during this prompt since it is dependent upon water to flush
the paid-for chemical into the basket.
Special Features
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
16
Part No. 806526ENR2
Содержание Quantum Platinum
Страница 2: ......
