Machine Cycle Definition and Operation
The control comes programmed with 9 machine cycles. The own-
er can modify machine cycles or set them to “unavailable” by
manually editing them in
, or through IR
communication or the network by downloading a modified ma-
chine cycle into the control.
Machine cycles cannot be deleted, but can be made “unavailable”
so that they are not visible from the
. New
machine cycles cannot be created, but existing machine cycles
that have been edited to be “unavailable” may be re-edited to be-
come available again.
Machine Cycle Operation
When a cycle is run, the control runs the cycle segment by seg-
ment and step by step in a sequence. The first segment can be
programmed to “Off”, “Prewash”, “Wash” or “Rinse”. If the seg-
ment is programmed to “Off”, control skips to the next segment.
If the segment is not programmed to “Off”, the first segment step
is examined to see if it is programmed on. If the segment step is
programmed on, it is executed and the next step follows until the
segment is complete. Any segment steps programmed to “Off”
are skipped.
At the start of a machine cycle, the control displays a Total Re-
maining Cycle time. The Total Remaining Cycle Time begins to
count down as soon as the cycle is started.
Machine Setup Sequence
1. Press the and keypads to highlight DEFAULT LAN-
GUAGE .
NOTE: If SKIP is selected, the control exits the Ma-
chine Setup Sequence and all menus will show in
English. The control will enter the Machine Setup
Sequence again upon the next power-up.
2. Press the keypad to show language options.
3. Press the and keypads to highlight the desired language.
4. Press the keypad to select.
5. The control displays the
. Press the and
keypads to highlight SAVE AND EXIT to set the selected
defaults or EXIT, DON'T SAVE to exit the Machine Setup
Sequence without selecting defaults.
6. Once the Machine Setup Sequence is exited, the control dis-
plays the
Cycle Selection Menu
Figure 5
Upon power-up, the control automatically enters the Cycle Selec-
tion Menu. The Cycle Selection Menu allows the user to select
one of the nine machine cycles. Machine cycles that are set to
"unavailable" are not displayed in the Cycle Selection Menu. The
display shows the default cycle: NORMAL/COLD.
Cycle Selection Options
The user can combine any temperature, cycle, and soil level op-
tions in a cycle except for the
, which has no soil op-
tions.
Press the Cycle Selection keypads to scroll through Cycle Selec-
tion Options. Refer to
for the list of options available for
each keypad. Press the keypad to select the cycle.
COLD
DELICATE
LIGHT SOIL
WARM
PERM PRESS
MEDIUM SOIL
HOT
NORMAL
HEAVY SOIL
Table 3
Machine Cycle Definition and Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
17
Part No. 806526ENR2
Содержание Quantum Platinum
Страница 2: ......
