Maintenance
Maintenance
WARNING
Use the proper chemical agents which avoid calcium
sediments on heating elements and other machine
parts. Discuss the issue with your supplier of wash-
ing products. The manufacturer of the machine is
not responsible for the damage of heating elements
and other machine parts due to calcium sediments.
W904
WARNING
Sharp edges can cause personal injury. Wear safety
glasses and gloves, use proper tools and provide
lighting when handling sheet metal parts.
W366R1
IMPORTANT: Replace all panels that are removed to
perform service and maintenance procedures. Do not
operate the machine with missing guards or with bro-
ken or missing parts. Do not bypass any safety devi-
ces.
NOTE: Measuring and adjusting the balance switch
must be done while the machine is empty.
Daily
CAUTION
Clean soap hoppers at the end of each working day.
Failing to do so will result in corrosion of the soap
hopper. Warranty claims for such damage will be de-
nied.
unique_58_Connect_42_W1060
1. Check water and possible steam inlets for leakage.
2. Check drain valve for leakage during a washing process and
for its proper opening (the valve is in open position without
electric current).
3. Clean the machine cabinet to remove any traces of washing
soaps.
4. Clean soap hoppers at the end of each working day.
5. Clean door gaskets to remove sediments and dirt.
IMPORTANT: Do not use solvents or acids to clean
the rubber door gasket. Do not use oil or grease on
rubber.
6. After the machine has been cleaned up, leave the door opened
to provide the machine venting and to prolong the door gasket
life service. We recommend to shut off all main inlets of elec-
tric power and steam (the laundry main valves and switches).
7. Motor - inverter operation fault - check:
a. Improper installation environment
b. Abnormal noise or vibration
c. Abnormal overheat
Beginning of Day
1. Check door interlock before starting operation:
a. Attempt to start the machine with the door open. The ma-
chine should not start.
b. Close the door without locking it and start the machine.
The machine should not start.
c. Attempt to open the door while the cycle is in progress.
The door should not open.
If the door lock and interlock are not functioning properly, dis-
connect power and call a service technician.
2. Check the machine for leaks.
a. Start an unloaded cycle to fill the machine.
b. Verify that door and door gasket do not leak.
c. Verify that the drain valve is operating and that the drain
system is free from obstruction. If water does not leak out
during the first wash segment, the drain valve is closed
and functioning properly.
3. Inspect water inlet valve hose connections on the back of the
machine for leaks.
4. On machines equipped with an automatic Chemical Supply
System, check all the hoses and hose connections for leaks or
visible signs of deterioration. Replace immediately if either
are present. Chemical leaks can cause damage to the ma-
chine’s components.
WARNING
To reduce the risk of electrical shock, serious injury
or death, disconnect the electrical power to washer-
extractor before examining the wiring.
5. Verify that insulation is intact on all external wires and that all
connections are secure. If bare wire is evident, call a service
technician.
6. Ensure all panels and guards are properly installed.
End of Day
1. Inspect and clean the basket and door gasket of residual deter-
gent and all foreign matter.
Maintenance
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
54
Part No. D2601EN
Содержание UY350 PROFORM TOUCH
Страница 2: ......
