Basic Description of Controls
General
The Control Offers:
• 15 pre-programmed programs.
• Control of signal voltages for external pumps or liquid supply
dispensers.
• Redistribution of the garments to avoid imbalance.
• Automatic temperature balance during the water fill process.
• Setting the machine options and configuration.
• Multiple languages can be selected (one at a time).
In Operation the Following Data is Displayed:
• The selected program.
• The active wash step.
• The remaining program time.
• Wash cycle progression bar.
• Indication of wait for heat (if selected).
• Diagnostic messages.
The Operation Menu:
• A program can be manually Shortened, Extended, Stopped.
• A pause can be programmed.
• A direct operation of selected components (water valves,
etc.).
• Program overview.
• Service information.
The Hardware and Software of the Wash Computer:
• Easy operation by a comprehensive keypad.
• The hardware contains 2 electronic boards.
• The wash computer with graphic LCD display.
• The control software of the washing machine is stored in the
internal memory of the wash computer and it can be easily ad-
justed (USB flash drive).
• The Wash Programs are kept in EEPROM memory (non-vola-
tile memory).
• Direct control of liquid-detergent pumps.
Specific
The PROGRAM Menu is Designated for:
• The creation of a specific name for a wash program.
• The creation and implementation of a new wash program step
by step.
• Editing a wash program step by step.
• Inserting and deleting steps in the wash program.
• Copying a wash program.
• Deleting a wash program.
• Inspecting the wash program by the view function.
The CONFIGURATION Menu is Designated for
:
• The selection of the machine type.
• Loading the default factory settings for the CONFIGURA-
TION and INITIALIZATION menu.
• The selection of the Brightness of the display.
• The selection of the power supply voltage of the washing ma-
chine.
• Loading the frequency inverter parameters.
• Erasing all the programmed wash programs (reset Wash pro-
gram EEPROM memory).
• Loading the standard wash programs.
• The selection of the number of wash machine water supply
inlets.
• The selection of a second drain valve (water recycling sys-
tem).
• Enablization of external liquid pumps (if applicable).
• The selection if the temperature must be displayed in degrees
Celsius or degrees Fahrenheit.
• The selection Full Heating.
• The selection of Wet Cleaning (very low programmable water
levels).
• The selection of the minimum level start supplies.
The INITIALIZATION Menu is Designated for
:
• The selection of the displayed Language.
• Programming the Service due value.
• The selection of the Buzzer time interval.
• The selection of the Advance function.
• The selection of the Wait for temperature function.
• The selection of the Manual override function.
• The selection of the Temperature balance function.
• Programming the Default Motor On and Off times for revers-
ing wash action.
• The selection of the Automatic Cooldown function.
• Programming the Boiler temperature (hot water supply).
• Programming the Temperature Overshoot Protection value.
• Programming the Maximum Heating time value.
• Programming the Maximum Fill time value.
• Programming the Maximum Level overfill value.
The SERVICE Menu is Designated for
:
• The inspection of the error messages log register and the list
with statistics.
• Activating the power of the frequency inverter.
• The inspection of the functionality of the electric input sig-
nals.
• Resetting the Cycle counter.
The ADVANCED Menu is Designated for
:
Basic Description of Controls
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
14
Part No. D1631ENR7
Содержание IYG065J
Страница 2: ......
