allen XL5000 OPPOSITE Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 80

background image

PRODUCT IDENTIFICATION

XL5000
M02001102EN0319

9

1.2

Compliant use

1.2.1

Ambient conditions

XL5000 (Standard / Opposite):

Ambient temperature, operation

[°C] ([°F])

+5 to +40 (+40 to +104)

Relative humidity, operation (non-condensing)

[%]

20 to 75

Protection class

[IP]

IP20

Ambient temperature, transport and storage

[°C] ([°F])

-25 to +55 (-13 to +131)

Relative humidity, transport and storage
(non-condensing)

[%]

20 to 75

1.2.2

Designated use

▪

The XL5000 printer operates with a thermal transfer printing method.

▪

The printing system can transfer, save and process alpha-numeric and graphical information and apply it to materi-
als suitable for this printing method.

▪

The XL5000 printer can be operated in intermittent mode. After modification, the printer can also be operated in
continuous mode.

▪

The printer is intended for commercial or industrial use.

▪

The printer may not be used outdoors or in a non-explosion-safe environment (Ex-area).

▪

Only auxiliary materials, operating materials (ribbon) and process materials (labels, foils, packing materials) suita-
ble for this printer and printing methods may be used.

▪

The Printer must be permanently installed into a frame designed for this purpose (machine frame/machinery
holder).

▪

No modifications to the printer are allowed.

▪

Operation and set-up of the printer may only be performed by trained personnel authorized by the operator.

▪

Working on the printer (installation, maintenance, cleaning) may only be performed by fully qualified and trained
technical personnel.

▪

The applicable safety requirements, the ambient conditions and technical data specified in these instructions must
be observed at all times.

▪

Operation of the printer may only proceed with the specified accessories/consumable material/replacement parts.
Only use original accessories and original replacement parts.

▪

The printer may only be operated with an inserted and locked cassette.

▪

The handles which are mounted on the cassette may not be used for lifting or carrying the printer.

Reasonably foreseeable misuse:

▪

Operation/use of the printing system other than in compliance with the designated use established by the manu-
facturer may result in hazards to personnel and/or property damage.

▪

Operation of the printing system with disabled safety devices (e.g. sensors).

▪

Operation of the printing system without the support system (frame).

«
...
7
8
9
10
11
...
»

Содержание XL5000 OPPOSITE

















































































Отзывы:

Нет отзывов

Похожие инструкции для XL5000 OPPOSITE

Бренд: Panasonic Страницы: 24

Бренд: Oki Страницы: 40

Workio DP-1820E

Бренд: Panasonic Страницы: 38

Saddle Finisher-AF2

Бренд: Canon Страницы: 244

Бренд: Duplo Страницы: 123

Бренд: Xerox Страницы: 55

WorkCentre 7328

Бренд: Xerox Страницы: 8

Бренд: Star Страницы: 88

Бренд: Oki Страницы: 336

Бренд: Oki Страницы: 94

Бренд: Oki Страницы: 9

4650NX - SuperScript Color Laser Printer

Бренд: NEC Страницы: 74

Бренд: Plas-Ties Страницы: 18

B-510DN - Business Color Ink Jet Printer

Бренд: Epson Страницы: 2

C117001-N - DFX 5000+ B/W Dot-matrix Printer

Бренд: Epson Страницы: 229

AcuLaser CX28 Series

Бренд: Epson Страницы: 328

B-310N - Business Color Ink Jet Printer

Бренд: Epson Страницы: 4

C094001 - FX 870 B/W Dot-matrix Printer

Бренд: Epson Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды