Allen-Bradley Micro830, Руководство пользователя

Страница: 313 / 354

Rockwell Automation Publication 2080-UM002K-EN-E - March 2019
299
User Interrupts Appendix D
STI User Interrupt Executing (STI0.EX)
The EX (User Interrupt Executing) bit is set whenever the STI mechanism
completes timing and the controller is scanning the STI POU. The EX bit is
cleared when the controller completes processing the STI subroutine.
The STI EX bit can be used in the control program as conditional logic to detect
if an STI interrupt is executing.
STI User Interrupt Enable (STI0.Enabled)
The User Interrupt Enable bit is used to indicate STI enable or disable status.
STI User Interrupt Lost (STI0.LS)
The LS is a status flag that indicates an interrupt was lost. The controller can
process 1 active and maintain up to 1 pending user interrupt conditions before it
sets the lost bit.
This bit is set by the controller. It is up to the control program to utilize, track, the
lost condition if necessary.
STI User Interrupt Pending (STI0.PE)
The PE is a status flag that represents an interrupt is pending. This status bit can
be monitored or used for logic purposes in the control program if you need to
determine when a subroutine cannot execute immediately.
This bit is automatically set and cleared by the controller. The controller can
process 1 active and maintain up to 1 pending user interrupt conditions before it
sets the lost bit.
Sub-Element Description Data Format User Program
Access
EX - User Interrupt Executing binary (bit) read only
Sub-Element Description Data Format User Program
Access
Enabled - User Interrupt Enable binary (bit) read only
Sub-Element Description Data Format User Program
Access
LS - User Interrupt Lost binary (bit) read/write
Sub-Element Description Data Format User Program
Access
PE - User Interrupt Pending binary (bit) read only