Alfa Laval Contherm 6X11, Инструкция по эксплуатации

Страница: 7 / 124

2 Safety Summary
2.1 Introduction
Always read the manual before working with or using the Contherm
™
.
It is the responsibility of the end user to ensure that personnel working with our equipment are trained and comply to the
latest industrial safety standards that apply to your country and location. Unsafe and hazardous conditions may occur if the
equipment is used by untrained personnel or without regard or knowledge of applicable safety precautions. These unsafe and
hazardous conditions or lack of proper use of personal protective equipment (PPE) may cause serious personal injury and/or
damage to the equipment.
Inherent hazardous situations are commonly present in Contherm
™
installations including slipping and tripping hazards, caustic
or acidic fluids, high pressure, high or low temperature fluids or substances, elevated working and service points, low ceilings,
electrical hazards and spaces that are not ergonomically ideal.
Equipment users must wear proper PPE suitable for the intended interaction when working on or around Contherm
™
equipment. This includes but is not limited to safety glasses, gloves for both hot and cold temperatures, noise protection,
chemical resistant outerwear, and slip resistant safety shoes.
2.2 Safety Precautions
Three types of safety precautions are used in this manual, with each type determined by the level of hazard seriousness the
user is exposed to.
DANGER
Indicates hazards which will result in severe personal injury or death.
WARNING
Indicates hazards or unsafe practices which could result in severe personal injury or death.
CAUTION
Indicates hazards or unsafe practices which could result in minor personal injury or product or property
damage.
If you have any safety concerns that are not addressed within this manual, please notify your supervisor and/or your local Alfa
Laval Inc. representative.
INSTALLATION AND DISASSEMBLY
Refer to INSTALLATION for additional safety information.
Have the Contherm
™
electrically connected by authorized personnel.
OPERATION
System Pressure Relief: To ensure safe operation, it is the end users responsibility to install pressure relief equipment to ensure
over pressurization of the Contherm
™
will not occur within the product and media pipework.
MAINTENANCE
Always use OEM Parts: OEM parts are to be used to maintain safe function of the equipment. Alfa Laval is not responsible for any
adverse effects to operator, equipment or product (being processed) safety that is created from the use of non-OEM components.
Always de-energize and lockout-tagout electrical circuits before working on the equipment.
TRANSPORTATION
Never lift the Contherm
™
equipment in a way other than described in this manual.
Always drain fluids from all chambers and ensure no leakage of fluids or lubricants.
Use original packing or similar and ensure the unit is securely fixed in its container.
7