Copyright © 2020
Alazar Technologies Inc.
ATS9353 User Manual
33
•
When you start AlazarTech Firmware Updater, you will see the following:
•
In Update file, click on the ellipsis to choose the corresponding firmware (.pof
file) you previously downloaded.
•
Select the board(s) that you wish to update. If you have only one board
installed in the computer, you can leave the Boards to update section
unmodified. The options available are:
o
Single Board Only:
Updates one digitizer in the system. The
digitizer to update is selected with the Board ID and System ID fields.
o
Boards System:
Updates all the boards in a system. The boards
system is selected with the System ID field.
o
All Boards:
Updates all the boards in the computer
•
Once all the parameters are set properly, click UPDATE to start the FPGA
update. A window will appear to indicate the progress of this process.