Copyright © 2020
Alazar Technologies Inc.
ATS9353 User Manual
23
Updating ATS9353 Driver
From time to time, AlazarTech updates the device drivers for its products.
These updates may be required for product enhancements or for bug fixes.
This section of the manual takes you through the steps required to update the
device driver for the ATS9353 PCI Express waveform digitizer.
In other words, this section shows you how to install a newer version of the
driver, when you already have a previous version of the driver installed on your
machine.
MS-Windows:
1.
Download the latest driver from AlazarTech’s website:
www.alazartech.com/support/downloads.htm
2.
Unzip the downloaded file to a local folder
3.
Run the resulting installation file (*.exe extension). For example, the
installation file for driver version 7.1.1 is called
ATS9353_Driver_V7.1.1.exe
, and follow the instructions.
Linux:
Download and install the latest driver for your Linux distribution (CentOS,
ftp://[email protected]/Outgoing/Linux
The exact name on disk of a given package file depends on the computer
architecture for which it is built, the Linux distribution used, and the actual
software version. For example, the driver for ATS9353 version 7.1.2 built for the
“x86_64” architecture on CentOS is contained in the “drivers ats9353 dkms
7.1.2.x86_64.rpm” file.
Please note:
AlazarTech recommends that you register your ATS9353 in order to receive
notifications of new driver releases. Take note of your serial number and go to
You must be logged into your
My AlazarTech
account in order to register a
product. If you do not have an account, sign-up for one here: