Copyright © 2020
Alazar Technologies Inc.
28
ATS9353 User Manual
•
When you start
AlazarTech Firmware Updater
, you will see the following:
In
Update file
, click on the ellipsis to choose the corresponding firmware
(.pof file) you previously downloaded.
•
Select the board(s) that you wish to update. If you have only one board
installed in the computer, you can leave the
Boards to update
section
unmodified. The options available are:
o
Single Board Only
: Updates one digitizer in the system. The
digitizer to update is selected with the
Board ID
and
System ID
fields.
o
Boards System
: Updates all the boards in a system. The boards
system is selected with the
System ID
field.
o
All Boards
: Updates all the boards in the computer
•
Once all the parameters are set properly, click
UPDATE
to start the FPGA
update. A window will appear to indicate the progress of this process.