Alaxala AX2500S, Руководство по устранению неисправностей

Страница: 120 / 136

4 Obtaining Failure Information
94
4.3 Transferring files via FTP
Failure information copied to the RAMDISK can be transferred to a remote terminal via FTP
by logging in to the Switch via FTP.
Make sure a VLAN and an IP address are set for the port used for the FTP connection.
On your PC, open the command prompt window. (For a standard Windows XP PC, select
Start , All Programs , Accessories , and then Command Prompt .)
The following figure shows an example of transferring a file to the C: \ TEMP directory on a
PC with a Switch IP address of 192.168.0.1.
Figure 4-3 Transferring files via FTP
Log in to the Switch via FTP from an FTP client PC.
C:\TEMP>ftp 192.168.0.1
......
Log in to the Switch from an FTP client PC.
Connected to 192.168.0.1
220 AX2530S-24T FTP server ready
User (192.168.0.1:(none)): operator
331 Password required
Password:
230 User logged in
ftp> asc
200 Type set to A, ASCII mode
ftp> get showteck.txt
......
Transfer the failure information file.
200 Port set okay
150 Opening ASCII mode data connection
226 Transfer complete
ftp:xxxxxx bytes sent in xx.x Seconds (xx.xx Kbytes/sec)
ftp> bye
221 Bye
...
see you later
C:\TEMP>
The failure information file is successfully transferred to the FTP client PC.