Alaxala AX2500S, Руководство по устранению неисправностей

Страница: 119 / 136

4 Obtaining Failure Information
93
4.2 Writing data to a memory card
Failure information copied to the RAMDISK can be written to a memory card. Note,
however, that memory cards have a capacity limit. This section describes how to write the
Switch information to a memory card via an operation terminal.
Figure 4-2 Writing information to a memory card
Insert a memory card into the Switch to which information is to be written.
Use the
show ramdisk-file
operation command to check the capacity of the source file
(
showtech.txt
).
> show ramdisk-file
Date 2010/08/06 17:38:20 UTC
File Date Size Name
2010/08/06 17:37 1,265 showtech.txt
>
Use the
show mc
operation command to check available space.
>show mc
Date 2010/08/06 17:38:24 JST
MC : enable
Manufacture ID : 00000003
used 5,750,272 byte
free 120,160,256 byte

Available space
total 125,910,528 byte
>
Use the
copy
operation command to copy the source file named
showtech.txt
to the memory card.
> copy ramdisk showtech.txt mc showtech.txt
Make sure the file has been written to the memory card by executing the following command:
> show mc-file
Date 2010/08/06 17:38:28 UTC
File Date Size Name
2010/08/06 17:35 1,265 showtech.txt
>