manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 82 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 82

Chapter 3: Recording Sequences

Page 69

• The 

Sig

 field (time signature):

This field shows the time signature entered in the previous screen.
It is for display only and cannot be changed.

• The 

Bars

 field

This shows the total number of bars in the newly initialized se-
quence, which is always initialized to 1 bar. When recording begins,
additional bars will be added to the end of the sequence as needed,
as is normal when the 

Loop

 field is set to OFF in the Play/Record

screen.

• The 

Loop

 field:

This is for display only and cannot be changed. It indicates that the
sequence’s 

Loop

 field is forced to OFF because loop recording is not

permitted during 16 channel recording.

• The 

<Done>

 soft key:

When finished recording, press this soft key to exit to the Play/
Record screen with your new sequence intact.

To record the incoming sequence:

 While holding the RECORD key on the MPC3000, start the exter-
nal sequencer playing from the beginning of its sequence. As soon as
the MPC3000 receives the sync signals, it will enter Record mode
and begin recording the data from the other sequencer in real time.
(Note: The OVERDUB key is disabled during 16 channel recording.)
Once the transfer is finished, stop the external sequencer (the
MPC3000 will stop automatically) or manually stop the MPC3000.

The MPC3000 now contains the transferred sequence, which can be
played using the PLAY, PLAY START, REWIND, FAST FORWARD
and LOCATE keys. Play the sequence; if the transfer was success-
ful, press 

<Done>

 to return to the Play/Record screen. If the

transfer didn’t come out as intended, try again by holding RECORD
and starting the other sequencer.

COMMENT: If the incoming multitrack sequence contains a
large amount of data or is playing at a very fast tempo, it is
possible for the MPC3000 to become overloaded, causing
delays in the timing of the recorded sequence. If this occurs,
reduce the tempo of the sending sequencer. This will lower the
MPC3000’s processing requirement, and should eliminate
any overload errors.

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов