manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 77 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 77

Chapter 3: Recording Sequences

Page 64

1. 

NO

: The metronome is only heard during Record or

Overdub modes, but not while in Play mode.

2. 

YES

: The metronome is heard in Play, as well as in

Record and Overdub modes.

• The 

Output

 field:

This choice field determines which audio output the metronome will
play through. The options are 

STEREO

 and 

INDIV 1

 (individual

out 1) through 

INDIV 8

 (individual out 8.)

• The 

Count IN 

field:

This is a choice field with two options:

1. 

REC+PLAY

: If the Count In light is on, the count in will

be heard before recording, overdubbing, or playing.

2. 

REC ONLY

: If the Count In light is on, the count in will

be heard before recording only.

• The 

Rate

 field:

This choice field controls the note value of the metronome. Nor-
mally, the metronome plays 1/4-notes. In this field it is possible to
change that value to one of eight options:

1/4 NOTE

1/4 TRIPLET

1/8 NOTE

1/8 TRIPLET

1/16 NOTE

1/16 TRIPLET

1/32 NOTE

1/32 TRIPLET

The Foot Switches /Free Memory section:

• The 

Foot1

 and 

Foot2

 fields:

These two fields determine the function of foot switches connected to
the rear panel FOOT SW 1 and 2 inputs. These are choice fields,
each of which can be set independently to one of the following
options:

PLAY/STOP

:

Press once for PLAY, press again for STOP.

PLAY-STRT/STP

 (Play start /stop):

Press once for PLAY START, press again for STOP.

ERASE

:

Press to duplicate the function of pressing ERASE. This is
very useful for hands-free use of the real-time erase
function.

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов