Akai MPC 3000 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 276

Akai MPC 3000 Скачать руководство пользователя страница 40

Chapter 2: The Basics

Page 27

• The

Note

field:

This field is used to assign the 16 Levels function to one of the 64
possible note numbers (35-98). When 16 Levels mode is on, all 16
pads will play one sound but at 16 evenly spaced levels of either
velocity, tuning, decay, attack, or filter frequency. Select a sound by
pressing a pad. This will automatically select the note number that
is currently assigned to the selected pad. For convenience, the sound
name currently assigned to the selected note number in the active
program is displayed.

• The

Param

field:

This is a choice field with two choices:

1.

VELOCITY

:

If this option is selected, and 16 LEVELS mode is on,
then the selected note number and sound will play from
all 16 pads, but at 16 fixed velocity levels with the softest
level on the lower leftmost pad and the loudest level on
the upper rightmost pad.

2.

NOTE VAR

:

If this option is selected, and 16 LEVELS mode is on,
then the selected note number and sound will play from
all 16 pads, but at 16 fixed levels of tuning, decay, attack,
or filter frequency using the Note Variation data stored
with each drum note in the sequence.

• The Note Variation Parameter field (

NOTE

VAR

(TUNING)

(TUNING)

(TUNING)

(TUNING)

(TUNING)

in the

screen example above):
This field has no label and appears only if NOTE VAR is selected
in the

Param

field. It is a choice field and is used to determine

which of the four Note Variation parameters is active. The four
choices are:

1.

(TUNING)

:

If selected, the 16 pads play a single sound but at 16
chromatic tunings. The tuning range is controlled by the

Center pad

field to the right.

2.

(DECAY)

:

If selected, the 16 pads play a single sound but at 16
evenly spaced levels of envelope decay. The range of decay
values is set in the Assign Note Variation screen.

3.

(ATTACK)

:

If selected, the 16 pads play a single sound but at 16
evenly spaced levels of envelope attack. The range of
attack values is set in the Assign Note Variation screen.

4.

(FILTER)

:

If selected, the 16 pads play a single sound but at 16
evenly spaced levels of filter frequency. The range of filter
frequency values is set in the Assign Note Variation
screen.

• The

Center pad

field:

This field only appears if the

Param

field is set to

NOTE VAR

and the Note Variation Parameter field is set to

(TUNING)

. It is

used to set the tuning range of the 16 pads by selecting which of

«
...
38
39
40
41
42
...
»

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов