manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 81 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 81

Chapter 3: Recording Sequences

Page 68

• The 

Sig

 field (time signature):

This is actually two fields—the upper and lower half of the time
signature to be used for recording. When 

<Proceed>

 is pressed,

the selected sequence will be initialized to one bar of the time
signature entered in these two fields.

• The 

Drums on ch

 field (drums on channel):

If one of the incoming MIDI channels will contain drum data and
you would like the corresponding MPC3000 track to be a DRUM
track, specify that MIDI channel here. When 

<Proceed>

 is

pressed, this track number will have its 

Type

 field set to 

DRUM

.

• The 

<Proceed>

 soft key:

When all of the above fields have been entered, press this soft key to
initialize the selected sequence and move on to the second Record 16
Channels screen:

======== Record all 16 channels ========
Seq: 1-Sequence_name    BPM:120.0 (SEQ)
Sig: 4/ 4   Bars:  1    Loop:OFF
========================================
While holding RECORD, play ext sequencer
with MIDI clock.
===== Bar:001.01.00 (00:00:00.00) ======
<Done>

This is the screen in which the actual recording will take place. The
selected sequence has now been initialized to contain one bar of the
time signature entered in the previous screen. The first 16 tracks
have been assigned to MIDI channels 1 through 16, as described
above. All tracks have their Type assigned to MIDI except for the
track number specified in the 

Drums on ch

 field in the previous

screen, which has been initialized to DRUM.

The fields and soft key are:

• The 

Seq

 field:

This field shows the sequence number that was entered in the
previous screen. In this screen it is for display only and cannot be
changed.

• The Sequence Name field (

Seq: 1-SEQ01

SEQ01

SEQ01

SEQ01

SEQ01

 in the above example

screen):
This is the selected sequence’s name. It can be changed in the same
manner as the Sequence Name field in the Play/Record screen.

• The Tempo Display Mode, Active Tempo, and Tempo Source fields:
These three fields operate exactly as their counterparts in the Play/
Record screen do.

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов