manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 51 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 51

Chapter 3: Recording Sequences

Page 38

The first part is the bar number; the second is the beat number
within the bar (the beat is equal to the denominator of the time
signature); and the third is the tick number within the beat (there
are 96 ticks to a quarter note). Bars and beats start at 1; ticks start
at 0.

To the right of the above-described bar.beat.tick number is another
four-part number, displayed in parentheses. This field shows the
current position of the sequence as a function of elapsed time from
the beginning of the sequence, in hours, minutes, seconds, and
frames. However, the number displayed when the sequence is set to
the start is not necessarily 00:00:00:00, but rather is equal to the
SMPTE start time. SMPTE operation is described in the chapter 10:
“Syncing to Tape and Other Devices”.

This field is for display only and cannot be edited directly with the
cursor. It is normally changed by using the REWIND, FAST FOR-
WARD and LOCATE keys, described in the “Play/Record Keys”
section of this chapter. These fields change in real time while the
sequence plays. However, the right-most part of each field—the ticks
and frames parts—are replaced with two dashes (

—

) while playing

because they would otherwise change too quickly to be useful.

The four soft keys are:

• The 

<Tk on/off>

 soft key:

Pressing this soft key toggles the Track On/Off field between 

YES

and 

NO

.

• The 

<Solo=OFF>

 soft key:

Pressing this soft key turns solo mode 

ON

 or 

OFF

. If set to 

ON

, only

the active track is heard and all other tracks are temporarily muted.
The text of the soft key indicates whether solo mode is 

ON

 or OFF.

• The 

<Track->

 soft key:

Pressing this soft key decrements the active track number by one.

• The 

<Track+>

 soft key:

Pressing this soft key increments the active track number by one.

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов