manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 60 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 60

Chapter 3: Recording Sequences

Page 47

2. Set the 

Type

 field to 

MIDI

, indicating that this track will not

play the internal drum sounds.

3. Set the 

Chn

 field to 1A, indicating that track 3 will play through

MIDI channel 1 and MIDI output port A. The 

Chn

 field is actu-

ally two fields—move the cursor to the position indicated by the
underline below and select 1:

Chn:OFF 

becomes—>

 Chn: 1A

4. If you play the MIDI keyboard now, the synthesizer that is set to

receive on MIDI channel 1 should play a bass sound. If not, check
the previous steps and your MIDI hookup.

5. Press the COUNT IN key—the light will go on. This will cause

the metronome to play one bar before the sequence plays to cue
you to start playing. By default, the count in will only play before
you start recording or overdubbing but not before playing. This
can be changed by pressing the OTHER key and changing the
setting of the 

Count in

 field in the screen that appears.

6. Enter RECORD MODE by holding RECORD and pressing PLAY

START.

7. Once the COUNT IN bar has passed, record your bass part in

time to the drums and percussion parts.

8. Press the COUNT IN key again to turn it off.

9. If you make a mistake while recording, you can correct it by

punching in the new note:

A) Press the REWIND keys [<] or [<<] until the 

Now

 field

shows a location about one bar before the mistake.

B) Press PLAY (not PLAY START). The sequence will start

playing from the position shown in the 

Now

 field.

C) Just before the wrong note plays, press RECORD and

PLAY simultaneously to enter Record mode (in which
existing notes are erased while new notes are recorded)
then play the correct note. You can now either punch out
by pressing RECORD again or continue recording from
that point. Don’t worry: when the sequence loops back to
bar 1, it will automatically switch from Record to Over-
dub mode so that those notes in the earlier part of the
sequence won’t be erased.

Now, overdub the piano part on track 4:

1. Move the cursor to the 

Trk

 field and select 4 to make track 4

active.

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов