manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 78 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 78

Chapter 3: Recording Sequences

Page 65

TIMING CORECT

 (Timing correct):

Press to duplicate the function of pressing TIMING COR-
RECT. This is very useful for hands-free use of the Note
Repeat function.

‘

+

’:

Press to duplicate the function of turning the data entry
control one step to the right.

‘

-

’:

Press to duplicate the function of turning the data entry
control one step to the left.

RECORD IN/OUT

:

Press once to duplicate the function of punching in to Record
mode while playing; press again to duplicate the function of
punching out of Record mode and back into Play mode.

OVRDUB IN/OUT

 (Overdub in/out):

Press once to duplicate the function of punching in to
Overdub mode while playing; press again to duplicate the
function of punching out of Overdub mode and back into
Play mode.

‘

<

’:

Press to duplicate the function of pressing the REWIND [<]
key. This is very useful for stepping backward through the
sequence while Step Edit is on.

‘

>

’:

Press to duplicate the function of pressing the FAST FOR-
WARD [>] key. This is very useful for stepping forward
through the sequence while Step Edit  is on.

TAP TEMPO

:

Press to duplicate the function of pressing the TAP TEMPO
key.

• The 

Free seq mem

 field:

This field shows the total amount of sequence memory currently
available for recording. It is for display only and cannot be edited.

The soft keys:

• The 

<Init PAR>

 soft key:

Pressing this soft key presents a screen used for initializing all
general system parameters, which are stored in PAR files. This
function is described in the following section of this chapter.

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов