manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 56 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 56

Chapter 3: Recording Sequences

Page 43

Overdub mode to avoid erasing your new notes. The notes you
played will be heard at the position they were recorded, except
that the Timing Correct function has automatically moved all of
your notes to the nearest 1/16-note. (This can be defeated, as
explained in “The TIMING CORRECT Key” section, later in this
chapter.)

8. Press STOP.

COMMENT: To initialize a sequence to a different time
signature or number of bars, press ERASE and select

<Initialize>

.

If you don’t think your pattern sounds as good as you intended, you
may need some practice in following the metronome. If you want to
erase what you’ve just recorded and start again, simply repeat steps
6 through 8 above.

To erase a particular drum from your new sequence

1. Press the ERASE key. The following screen will appear:

================= Erase ================
Seqnc: 1-SEQ01
Track: 1-TRK01            (0 = all)
Ticks:001.01.00-003.01.00
Erase:ALL EVENTS
Notes:ALL                     (Hit pads)
========================================
<Do it> <Initialize><Delete><Delete All>

2. To select a particular drum to erase, press the drum pad that was

used to record its notes. Immediately, the 

Notes

 field will

display the note number (35-98), pad number, and currently
assigned sound for the selected pad. To erase additional notes,
continue pressing pads. The 

Notes

 field will always display the

last pad pressed, and the total number of pads selected is dis-
played on the right side of the same line.

3. Press Soft key 1: 

<Do it>

. When you press this soft key, all

notes assigned to the note number(s) you selected will be erased
throughout the track, after which the Play/Record screen will be
displayed.

4. Now, enter Overdub mode by holding OVERDUB and PLAY

START simultaneously and re-record that pad into your track.
(Unlike Record mode which erases existing notes as you record
new notes, Overdub mode merges the new notes into the existing
notes.)

To hear your new drum pattern, press STOP then PLAY START.

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов