manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 59 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 59

Chapter 3: Recording Sequences

Page 46

the nearest value specified in the Timing Correct screen (in this
case, 1/16-note).

5. Without stopping the sequence, record a 1/16-note hi-hat part by

simultaneously holding the TIMING CORRECT key and the
HIHAT CLOSED pad, varying the pressure on the pad as the
sequence plays. After four bars, release both the key and the pad.
Notice that closed hi-hats have now been recorded on all 1/16-
notes. This feature is called note repeat and is described further
in the “Timing Correct” section, later in this chapter. If at any
time you want to erase what you’ve recorded and start over, go
back to step 3.

   If you accidentally played one or two wrong notes, you can erase

them without affecting any other notes by following these steps:

A) While still in Overdub mode, hold down the ERASE key.
B) Just before the wrong notes are about to play, hold that

drum’s pad down, then quickly release it as soon as the
wrong notes have passed.

C) Release the ERASE key. The wrong notes have now been

permanently erased from the sequence.

6. Press STOP.

Next, overdub the percussion part on track 2:

1. With the Play/Record screen showing, move the cursor to the 

Trk

field and select 2.

2. Set the 

Type

 field to 

DRUM

.

3. Enter Record mode again by holding RECORD and pressing

PLAY START. You will hear the drum part you just recorded on
track 1. Don’t worry about erasing it: since track 2 is now the
active track, all recording and erasing occurs only on track 2.

4. Record the percussion part by playing pads assigned to percussion

instruments. (Try Pad Bank B.) Keep adding drums until your
percussion part is complete.

5. If any mistakes were made, use either of the two erase methods

described above.

Next, overdub the bass part on track 3:

1. With the Play/Record screen showing, move the cursor to the 

Trk

field and select 3 to make track 3 active.

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов