manualshive.com logo in svg

Akai MPC 3000, Руководство оператора, Страница: 28 / 276

Поделиться
Скачать
Akai MPC 3000 Скачать руководство пользователя страница 28

Chapter 2: The Basics

Page 15

Getting Around on the MPC3000

Before you can use the MPC3000, you must learn how to use the
cursor keys, data fields, command keys, the data entry keys and
data entry control, the soft keys and the HELP key.

While no disk is in the drive, turn the power on. After a few seconds,
the LCD screen will display the following text:

============== Play/Record =============
Seq: 1-(unused)         BPM:120.0 (SEQ)
Sig: 4/ 4   Bars:  0    Loop:TO BAR   1
============== Track Data ==============
Trk: 1-(unused)         Type:DRUM On:YES
Chn:OFF-(off)    & OFF  Vel%:100 Pgm:OFF
===== Now:001.01.00 (00:00:00:00) ======
<Tk on/off> <Solo=OFF> <Track-> <Track+>

This is known as the Play/Record screen, as indicated by the title at
the top of the screen. It’s also known as the Main Screen.
It is the main operating state of the MPC3000 and most playing and
recording of sequences is done when this screen is in view. It  will be
discussed further in the chapter entitled “Recording Sequences.” If
at any time while operating the MPC3000 you are confused and
want to return to this screen, press the MAIN SCREEN key.

COMMENT: If you can’t clearly see the text on the screen, try
adjusting the LCD CONTRAST control.

The Cursor, Cursor Keys, Data Fields, and Command Keys

Make sure that the Play/Record screen is showing. If not, press
MAIN SCREEN.

Notice that a small rectangular block is blinking somewhere on the
screen. This is called the cursor. It is possible to move the cursor
around the screen using the four gray direction keys located in the
Cursor section of the panel. These four keys are referred to as the
CURSOR LEFT, CURSOR RIGHT, CURSOR UP and CURSOR
DOWN keys. Try moving the cursor around the LCD, then move it
to the upper left corner.

Notice that the cursor does not move from letter to letter, but rather
jumps across many letters at a time, landing only in certain loca-
tions, usually to the right of a colon (:). These areas are called data
fields and each one controls a specific parameter. For example, the
upper left-most data field is called 

Seq

, an abbreviation for

Содержание MPC 3000





















































































































































































































































































Отзывы:

Нет отзывов